Legacy Linux Setup Guide
Last updated: November 17, 2026
Does your Linux device use systemd and have glibc 2.28 or newer? Don't use this guide. Use the new ScreenKin or Best Accountability Linux app instead. It's faster, more stable, and keeps itself up to date automatically. Most modern distros qualify, such as Ubuntu 20.04 and newer, Debian 10 and newer, and current Fedora.
Not sure what you have? Run these in a terminal:
cat /etc/os-release
ldd --version
The new ScreenKin and Best Accountability Linux apps require a 64 bit Intel/AMD or ARM processor, systemd, and glibc 2.28 or newer.
- If your device can be upgraded to a distro version that meets those requirements, we recommend upgrading first, then following the Linux Setup Guide.
- If your device can't be upgraded that far, you can still monitor it with the legacy Truple Linux app by following this guide.
Things to know about the legacy Truple Linux app
- It no longer receives updates. That means no bug fixes, no security updates, and no new features. If an update to your distro causes it to stop functioning, it won't be fixed. We recommend upgrading your distro and installing the latest version of our apps instead whenever that's possible.
- It needs Legacy End-to-End Encryption. The legacy app can't use the End-to-End Encryption our current apps use, so the Legacy E2EE passcode has to be set up on your account (see step 1 below).
- App updates must be disabled after installing (see step 5 below).
- It does not support blacking out banking websites. We strongly encourage the use of the image blurring feature to hide private information that may be captured.
Step 1: Set up Legacy E2EE on your account
The account owner does this once per account, from any computer or phone. If your account already has a Legacy E2EE passcode, skip to step 2.
Follow the instructions for enabling the Legacy E2EE passcode.
Write your passcode down! Your report recipients will need it.
Step 2: Install the required tools
- Check which display server you're using (see Wayland vs X11 below). Open a terminal and run:
This will return either
echo $XDG_SESSION_TYPEwaylandorx11. - Recommended: Install the screenshot tool for your display server:
- X11:
sudo apt-get install imagemagick - Wayland:
xdg-desktop-portal(should already be installed on most Wayland systems)
- X11:
- Download and install libfuse2
sudo apt-get install libfuse2
Step 3: Download and launch Truple
- Download Truple: linux.truple.io/prod/Truple.AppImage
- Make the file executable
chmod +x Truple.AppImage - Launch the AppImage using the command below (or just double click on it)
./Truple.AppImage --no-sandbox &
Important: Once you place the Truple.AppImage file, do not move or rename it. The app needs to stay in the same location to function properly. Moving or renaming the file will result in a tamper email being sent.
Step 4: Add the device to your account
- Click
Add device to account. - Provide the subscribed account's email address and a name for this device, then click
Submit.
You can use your subscribed Truple, ScreenKin, or Best Accountability account. - The subscribed account owner then logs in at app.truple.io and grants the request to add the device.
- Back in the app, click
Check if granted. The app will launch the monitoring service. - Wayland only: when your system asks for permission to capture screenshots, make sure you grant it. If you deny it, getting the system to prompt again can be difficult.
- (Optional) To install for all users on the device, click the Truple icon near the clock, then click
Install for all users. This must be done from a Linux user with admin privileges.
Step 5: Disable app updates
Don't skip this step. The legacy Truple Linux app no longer receives updates, so app updates need to be turned off.
- Find the Truple icon in the notification bar located near the clock.
- Click on the icon, then select
Advanced Settings. - Select
Toggle updatesto disable them.
If you ever reinstall the app, disable app updates again afterwards.
You can adjust the device's settings (image blurring, screenshot frequency, etc) from the device settings page at https://app.truple.io/devices.
If you experience any issues, please open a support ticket.
Wayland vs X11
Linux uses a display server to show graphics on your screen. There are two main types: X11 (the older, traditional system) and Wayland (the newer system). The legacy Truple app supports both, and uses a variety of tools to capture screenshots depending on your display server. After the first successful capture, that method is remembered and used first for all subsequent attempts.
Wayland (recommended: xdg-desktop-portal)
The app will try the following methods in order:
- xdg-desktop-portal (D-Bus)
- org.gnome.Shell.Screenshot (D-Bus, GNOME only)
- grim
- gnome-screenshot
- spectacle
- scrot
- maim
- ImageMagick
X11 (recommended: ImageMagick)
The app will try the following methods in order:
- ImageMagick
- scrot
- maim
- xdg-desktop-portal (D-Bus)
- org.gnome.Shell.Screenshot (D-Bus)
- gnome-screenshot
- spectacle
- grim
Supported Distros
There are a lot of different linux distros out there. The legacy Truple app was designed to work with Ubuntu. Customers have reported some tweaks needed in order to use it on other distros below. We cannot verify/guarantee the tweaks will result in everything working for your device.
- Fedora - Install x11-xserver-utils by running
sudo dnf install x11-xserver-utils - Ubuntu - Some customers have reported needing to install imagemagick using the following command
sudo apt install graphicsmagick-imagemagick-compat - Debian - See https://trendoceans.com/how-to-enable-x11-and-disable-wayland-window-system/
Troubleshooting
Error: GLIBCXX_3.4.32 not found
The legacy app uses updated GCC libraries. Some older versions of Ubuntu (< 24.04) and other linux distros may require an update to those libraries. Customers have reported the following commands resolved this issue for them:
sudo add-apt-repository ppa:ubuntu-toolchain-r/test
sudo apt-get update
sudo apt-get install --only-upgrade libstdc++6
Error: ERR_FAILED (-2) loading 'app://./index.html'
If you get the following error when you try to launch the app (see log files), run the app using the --no-sandbox flag as indicated.
Error:
UnhandledRejection Error: ERR_FAILED (-2) loading 'app://./index.html
The fix is to run the app using the --no-sandbox flag as shown below:
./Truple.AppImage --no-sandbox &